CyberData 11307, Operation Manual

Page: 49 / 124

Installing the Singlewire InformaCast Indoor Intercom with Keypad
Configure the Button Parameters
Operations Guide 931640A CyberData Corporation
42
2.4.6.2 Triggering a Dial Out Call or Security Code
You can instantly trigger a dial out call or security code by pressing the # key after dialing a number.
Table 2-11 shows the various actions that result from different keypad input.
Allow Telephone Dialout Option Enabled (in security mode with default security settings)
Input Resulting Action
The device will instantly call extension 123 through the default SIP
server.
Allow Telephone Dialout Option Disabled (in security mode with default security settings)
Input Resulting Action
Table 2-11. Triggering a Dial Out Call or Security Code
Dialing 123

(and waiting for several seconds)
The device will call extension 123 through the default SIP server.
Dialing #123

(and waiting for several seconds)
The device will do nothing. The entry is an unrecognized security
entry.
Dialing #1234560

(and waiting for several seconds)
The device will activate the relay for Security Code 0 for 6 seconds.
Dialing #124560# The device will instantly activate the relay for 6 seconds.
Dialing 123#
Dialing 123456

(and waiting several seconds)
The device will activate the relay specified on the Security
Configuration Page (local or DSR) for the seconds specified in the
Relay Timeout (seconds) setting.
Dialing 9876123

(and waiting several seconds)
The device will activate the local relay.
Dialing 9876456

(and waiting several seconds)
The device will deactivate the local relay.