POE Clock Messages
Definitions
Operations Guide
931080C
CyberData Corporation
29
2.3.8 <DevName>
Configurable POE Clock name, 16 characters maximum, i.e. “Loading Dock”, “Kitchen”, etc.
2.3.9 <DHCP>
Configurable DHCP IPv4 parameter. Valid values are “Enable” and “Disable”.
2.3.10 <DHCPLease>
Remaining DHCP lease time in seconds.
2.3.11 <DNS1> & <DNS2>
Configurable IPv4 DNS server addresses used by NTP to locate NTP servers by URL for NTP date
& time update.
2.3.12 <DNSHostName>
Configurable Host Name included in DHCP request packet used by some routers to identify an
endpoint.
2.3.13 <DSTBE>
Configurable Daylight Saving begin and end expressed in a POSIX-like format. For example,
“M3.2.0/02:00:00,M11.1.0/02:00:01” specifies Daylight Saving begin at Month 3, week 2, Sunday, at
02:00:00, Daylight Saving end Month 11, week 1, Sunday, at 02:00:01. Valid month values are 1-12,
week 1-5, day 0(Sunday)-6(Saturday). Accurate configuration of this parameter value is necessary
for successful automatic Daylight Saving adjustment and NTP update.
2.3.14 <DSTOF>
Configurable Daylight Saving offset expressed as hours and minutes “HH:MM” from Standard Time.
Accurate configuration of this value is necessary for successful automatic Daylight Saving
adjustment and NTP update.
2.3.15 <FirmWareVer>
POE Clock firmware version number.