CyberData 010861 930106A, Operation Manual

Page: 26 / 42

CyberData Corporation 930106A VoIP Loudspeaker Amplifier Operations Guide
Installing the VoIP Loudspeaker Amplifier 20
2. On the SIP Setup page, enter values for the parameters indicated in Table 2-11 .
3. After changing the parameters, click Save Settings .
Table 2-11. SIP Setup Parameters
Web Page Item Description
SIP Server* Enter the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
Remote SIP Port* Enter the Remote SIP Port number (default is 5060).
Local SIP Port* Enter the Local SIP Port number (default is 5060).
SIP User ID* Enter the SIP User ID (up to 30 alphanumeric characters).
Authenticate ID* Enter the Authenticate ID (up to 30 alphanumeric
characters).
Authenticate Password* Enter the Authenticate Password (up to 30 alphanumeric
characters).
SIP Registration* Enable/Disable SIP Registration.
Unregister on Reboot* • Select Yes to automatically unregister the paging
amplifier when it is rebooted.
• Select No to keep the paging amplifier registered when it
is rebooted.
Register Expiration* Enter the SIP Registration lease time in minutes (default is
60 minutes).
Click on this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will
cause a system reboot when saved.
Link to the Speaker Setup page.
Link to the Network Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.