17
CYB-KLED CyberSuite Installation Manual
OPTIONS (MENU 2)
General Options ([MENU] , [2] , [1])
The general options set options that relate to the general operation
of the CyberSuite keypad.
To enter the General Options Menu, press
[MENU] , [2] , [1]
To toggle options press the keys [1] to [8] , and the corresponding
Zone LED will be lit when that option is ENABLED.
Pressing the [ENTER] key will save the options.
Option 1 - Zone Type Option 1
If duplex zone (Option 2) is not enabled then Option 1
will set the zone input configuration (EOL or NO EOL).
EOL requires the use of 2 X 1K resistors to provide,
Short, Alarm, Closed and Tamper Monitoring. NO EOL
provides Alarm and Closed monitoring.
5
Enabled EOL resistors are used (2R Mode) (2 Zones).
6
Disabled NO EOL resistors are used (2 Zones).
Option 2 - Duplex Zone Operation
If Option 2 is set Option 1 does not have any function.
When option 2 is set the zones will use a 1K and 2K4
resistor and provide monitoring for 2 zones.
5
Enabled Duplex Zone Mode (4 Zones).
6
Disabled Option 1 sets the zone configuration.
Option 3 - Beep On Trouble Condition
5
Enabled the beeper will emit 4 beeps every 5 minutes
if a trouble condition is present, to silence the trouble
beep, view the trouble condition.