Copyright © 2014 Cyber
Power Systems, Inc.
HARDWIRING THE INPUT/ OUTPUT TERMINALS
7
Step 1: Separate the top and bottom covers
Loosen the two screws to separate the top and bottom covers.
Step 2: Fix the bottom cover on the terminal block
Tighten the two screws to fix the bottom cover on the terminal block.
Step 3: Bypass configuration (for dual input configuration)
Remove the interconnection wires (Jumper) on bypass terminals (J / L)
and insert the bypass cable through the appropriate cable gland (not
included).
Connect the three wires to the bypass terminal block (L / N / G).
Step 4: Input configuration
Insert the input cable through the appropriate cable gland (not included).
