Copyright © 2014 Cyber
Power Systems, Inc.
BASIC OPERATION
10
POWER MODULE FRONT/REAR PANEL DESCRIPTION
1. Power Button / Power on Indicator
Master ON/OFF for the UPS. Indicates that the UPS is on
and supplying power.
2. UPS Status / Fault / Replace Battery LED Indicator
Indicates the status of the UPS whether is operating in
Line, Battery or Bypass Mode, or the UPS has an internal
fault and the battery need to be replaced.
3. Multifunction LCD Readout
Shows UPS status, information, settings and events.
4. Function Buttons
Scroll up, scroll down, select and cancel LCD menu.
5. Input Circuit Breaker
Provides input overload and fault protection.
6. Bypass / Input / Output Terminal Block
Connect to utility power / your equipment.
7. Manual Bypass Switch
Provide UPS output to connected equipment when turned
to Normal. Provide utility power to connected equipment
when turned to Bypass.
8. Serial Port
Serial port provides communication between the UPS and
the computer. The UPS can control the computer’s
shutdown during a power outage through the connection
while the computer can monitor the UPS and alter its
various programmable parameters.
9. USB port
This is a connectivity port which allows communication
and control between the UPS and the connected computer.
It is recommended to install the PowerPanel® Business
Edition Agent software on the PC/Server connected with
the USB cord.
10. Remote Control Port
Connects to remote LCD module to the UPS.
11. Surge Protected Communication Ports RJ-45/RJ-11
These ports are used to protect standard RJ-45/RJ-11
based products (ADSL, LAN, Phone/ Modem-Lines) and
cabling systems from surges.
12. Relay Output Connector
Convert UPS signals into real potential-free Dry Contacts
for industrial control.
13. SNMP/HTTP Network slot
Slot to install the optional SNMP card for remote network
control and monitoring.
14. Extended Runtime Battery Module Connector
Connection for additional CyberPower XL Battery
modules.
OL6KERT3UDMPM / OL8KERT3UDMPM / OL10KERT3UDMPM
OL6KERT3UDMPM
OL8KERT3UDMPM / OL10KERT3UDMPM
15. EPO (Emergency Power Off) Connector
Enables an emergency UPS Power-Off from a remote location.
16. Backfeed Protection Connector
Prevents power feedback from the inverter to utility power in case of power failure and a
fault in the bypass circuit.
