Getting Started - Bluetooth Connection - Step 1
Before you start, insert the USB Type A end of the Speaker Cable into the USB Type A port on your
computer. (See Page 2 - USB Connection)
- Press the Multi-Function Button two times (see controls on Page 6) to switch between USB mode
and Bluetooth mode.
- When changed to Bluetooth mode, the Speaker Bar will be in pairing mode and the Source Light
will be flashing blue or if already connected to a Smartphone or Table the Source Light will be
solid blue.
Source Light Flashing Blue
- The Cyber Acoustics Speaker Bar is ready to pair and connect. (See page 4 to connect your
Smartphone or Tablet)
Source Light Solid Blue
- Your device has connected to the Cyber Acoustics Speaker Bar and is ready to use.
- The Cyber Acoustics Speaker Bar allows the last device it was connected with to automatically
reconnect with the speaker each time the speaker is turned on and that device is within range.*
- When connected to a Smartphone, the Speaker Bar will auto switch to Bluetooth mode from USB
mode when there is an incoming call on the connected Smartphone.
The Cyber Acoustics Speaker Bar can be connected to one device at a time.
- To pair and connect to a different device, you need to first disconnect the currently paired device.
- To disconnect the current device, press and hold down the Multi-Function Button for 5 seconds.
- The Source Light will begin flashing blue and the Cyber Acoustics Speaker Bar is ready for the next
device to pair and connect.
* Your device needs to be within 10 unobstructed meters of the Cyber Acoustics Speaker Bar to pair and
connect. If there is an issue when connecting please move your device closer to the speaker, then pair
and connect.
Page 3
