v2.4c
03.04.12
CybTouch6_Shear_Usermanual_v2.4c_TK
page 8 of 18
P
AGE
3
OF PROGRAM
:
S
EQUENCE
2,
PROPERTIES FOR SECOND
CUT OF PROGRAM
:
Note:
Up to 24 sequences can be added to a program.
After completing the cuts, you can save the program by touching the
P0
field
(program number) and giving the program a number so that you can use it again later.
5.
Touch the
Back gauge position
value
and enter the value using the keyboard.
6.
Go back to the first sequence created by
touching the
Previous page
button.
7.
Turn on the pump, by touching the
Pump
On – Off
button for 2 seconds (or using
the button directly on the machine).
8.
Touch the
START
button or briefly press
the foot-pedal to position the back gauge.
When the machine is ready, the
START
button displays
OK
. The machine will not
cut until
OK
is displayed:
9.
Press the foot-pedal to execute the
program.
