6/38
S
ept
.
2014
V3.1
CybTouch 12 PS User Manual
Language
Show Y1-Y2
position values
To browse through the available languages, simply touch
Language
on the screen.
Available languages are:
This function will display the Y1 and Y2 axes positions on the
.
• When set to
no
, the position of axis Y1 is displayed during the beam’s movements.
• When set to
yes1
, the positions of the beam’s axes are displayed during the beam’s
movements.
• When set to
yes2
, the positions of the beam’s axes are constantly displayed under the
angle/beam’s position line.
•
EN
English.
•
BR
Brazil.
•
CN
中文
.
•
CZ
Český.
•
DE
Deutsch.
•
ES
Español.
•
FR
Français.
•
IT
Italiano.
The list of available languages is subject to change and may increase over time.
Length Units
This parameter allows choosing between
mm
,
inch
and
none
for the length unit to be
used in the CybTouch.
Show page
L-alpha num
When set to
yes
, this parameter gives access to the
button
is then displayed on the
Show bent part
This parameter, when activated, lets the operator see the state of the part before and after
the bend in the
Automatic Bend Sequencing (optional)
•
NL
Nederlands.
•
TR
Türkçe.
•
TW
台灣
.
When
none
is selected, the units are millimeters.
