11
Rigging
Rigging
Rigging
Rigging
（
（
（
（
Optional
Optional
Optional
Optional
）
）
）
）
This equipment can be positioned and fixed by clamp in every direction of the stage. Locking system
makes it easy to fasten to the bracket.
Attention! Two clamps are needed to fix the equipment. Every clamp is locked by fastener of 1/4 kind.
Fastener can only be locked clockwise.
Attention! Fasten a safety string to the additional hole of side aluminum piece. The secondary accessory
can not hang on the delivery handle. Nip the equipment on bracket.
1, Check if rigging clamp (not including the one inside) damaged or not. If stand ten times weight as the
equipment. Make sure the architecture can stand ten times weight as all the equipments, clamps, wirings
and other additional fixtures.
2, Screws for clamping must be fixed firmly. Take one M12 screw (Grade 8.8 or higher) to clamp bracket,
and then screw the nuts.
3, Level the two hanging points at the bottom of clamp. Insert fastener to the bottom, lock the two levers
by 1/4 rotating clockwise; then install another clamp.
4 Install on safety string which stands at least ten times weight as equipment. Terminal of the accessory
is designed for clamps.
5 Make sure pan/tilt lock opened or not. Keep the distance more than 1 M from equipment to flammable
material or lighting source.
Maintenance
Maintenance
Maintenance
Maintenance
Cleaning
Cleaning
Cleaning
Cleaning of
of
of
of lens
lens
lens
lens system
system
system
system
�
Wash exterior and interior optical mirrors to enhance the brightness in regular time, especially when
equipment used in messy surroundings. Use mirror cleanser (or alcohol) to wash exterior mirrors in
every 15/20 days, 40/60 days for interior focusing prism/reflector.
Safety
Safety
Safety
Safety information
information
information
information
�
Do not separate the light personally.
�
Prevent liquid, water and metal into the equipment.
The
The
The
The equipment
equipment
equipment
equipment not
not
not
not fit
fit
fit
fit for
for
for
for cases
cases
cases
cases below:
below:
below:
below:
◆
Relative humidity is too high.
�
Shake and hit
�
Room temperature is above 40 degree or below 0 degree.
�
Relative temperature is below 30 degree or above 80 degree.
Notice
Notice
Notice
Notice
：
：
：
：
�
In case of serious problems, stop using the equipment, and refer it to the agent or factory for
checking.
�
Do not separate the equipment; there are no accessories for replacing use in it.
�
Who to check this equipment must be well qualified.
�
If the functional controller is used to ignite light, be cautious that the voltage will fall down
immediately when many lamps are lighted. The solution to this is lighting the lamps in every five
