P/N IM-WRA-3 Rev. A
2012 Commercial Wireless Systems International, LLC.
15
WRA-3 programmer front screen
Click on the connection top menu item and then click connect. The word connected will appear in the
bottom left corner of the programmer screen when the control panel connects to the computer. If the
panel cannot connect check that a ubs connection shows up in Windows device manager when the
panel is connected. Also check the usb connection between the computer and panel.
Once connected choose the Operations top menu item and click on Export to Annunciator. Save the
file to a formatted micro sd card. Alternatively save the file on the computer then copy the file to a
formatted sd card. The file will automatically be named as annunciator.bin.
Exporting the file
Successful file save
Insert the sd card with the annunciator.bin file on it into the J27 sd card slot marked “Insert SD Card”
on the annunciator(s) to be programmed (Figure 2). The contact pins should be facing down. Push
the card all the way into the connector until it locks into the sd card holder. A checksum bad trouble
will be transmitted to the CP-3000A(DA). The annunciator trouble led will flash and the sounder will
beep a trouble condition until the sd card is removed.
Flip the front cover of the WRA-3 up so the lcd can be viewed. The lcd should be displaying a
“Program Device Table” message. Press the SIGNAL SILENCE button to start the programming.
