background image

 

 

Product Manual 

CVS 1000L Electro-Pneumatic Linear Positioner 

INTRODUCTION 

 

Thank you for choosing the YT-1000L. Each  product 

is fully inspected after production to offer you the   

highest quality. In order to fully utilize the product, we 
strongly recommend users to read this manual      

carefully.  

• 

The manual can be changed or revised without 

any prior notice. Any changes in the product’s 

specification, structure and/or any components 
may not result in an immediate  revised version of 

the manual. 

• 

The manual should not be duplicated or           

reproduced for any purpose without the approval 

of CVS Controls Ltd. 

 

MANUFACTURER WARRANTY 

 

- For safety, it is imperative to follow instructions in the 

manual. The manufacturer is not liable for any       

damages caused by the users negligence.   

- The manufacturer is not liable for any damages or 
accidents as a result of alterations or  modifications 

made to the product or parts. If alterations or         

modifications are required, please contact  

CVS Controls Ltd.  

- The manufacturer warrants the product from the orig-

inal date of purchase for one (1) year, except as other-
wise stated. 

- The manufacturer warranty will be considered void 

should the product be subjected to abuse, faulty    

installation, lack of reasonable care, repair or service 

in any way, that is not contemplated in the            doc-
umentation of the product, or if the model or serial 

number has been altered, tampered with, defaced, or 

removed; damages that occur in   shipment, due to the 

act of God, failure due to power surge, and cosmetic 

damage. Improper or incorrectly performed           

maintenance also voids the Limited Warranty.

 

 

 

PRODUCT DESCRIPTION 

 

Main Features and Functions 

 

• 

It is designed for high durability and performance 
in high vibration environments. 

• 

Proven Durability. 

• 

Short and accurate response time. 

• 

Simple part change can set a 1/2 Split Range. 

• 

Economical due to less air-consumption. 

• 

Direct/Reverse action can be easily set. 

• 

Simple zero and span adjustment process. 

• 

Easy feedback connection. 

Summary of Contents for CVS1000L













Reviews: