7209
3202
4241
5230 FOR
7209 PIN
7209
Spacer
7200
5230
5004
3205
5230
1255
7209
Spacer
-Mount the Castor Block to the Susp Arm by
inserting the 4241 Susp Pin thru the Susp Arm
and Castor Block.
-Retain the Susp Pin by attaching 5230 E-Clips to
each end.
- Insert the 7200 Axle into the
3202 Steering Arm so the
holes are in-line.
-Align the Steering Arm into
the 3205 Castor Block and
press the 7209 Ball Stud
Kingpin thru the assembly
as shown.
STEP #3
STEP #2
8122
8122
3304
3304
8122
8122
5262
3202
5217 NUT ON
5257 SCREW
5217 NUT ON
5257 SCREW
Rear Suspension
Rear Suspension
Rear Suspension
Rear Suspension
Rear Suspension
4234 Qty 2
Rear Inner Susp Pin
3240 Qty 2
Rear Susp Arm
5253 Qty 2
4-40 x 3/8 BH Screw
1:1
3305 Qty 1
Tail Tank Tray
-Parts for
Step#1
2222 Qty 2
1-3 Deg Toe Block
1284 Qty 2
Med Shock Ear
1:1
1273 Qty 1
Rear Bulkhead
-Parts for
Step#2
1:1
5230 Bag A
E-Clip
1:1
5263 Qty 4
4-40 x 3/8 FH Screw
5264 Qty 6
4-40 x 1/2 FH Screw
1284
-Attach the 1284 Long Shock Ears to
the 1273 Bulk to the side facing away
in the diagram.
-Attach the 3305 Tail Tank Tray as
shown in the diagram.
1284
1273
3305
5253
5255
STEP #2
-LEFT Side
Assembly
FRONT
STEP #1
2222
3240
4234
5230
Bag C
Bag C
Bag C
Bag C
Bag C
5254
5254
5263
5255
5217
5217
FRONT
-Make a RIGHT
and LEFT
assembly!
-Attach the 3254 Susp
Arm to the 2222 Toe
Block using the 4234
Susp Pin. Retain the pin
with 5230 E-Clips.
-Fasten the LEFT assembly to
the
INNER most set of holes.
-Fasten the RIGHT assembly to
the
OUTER most set of holes.
- Mount the Susp Tower assem-
bly using 5263 Screws.
NOTE: Mount the Toe Blocks to the
chassis in the 3 deg position. The
screw will pass thru the hole
closest to the 3 machined in the
part. The numbers on the part
should be to the rear of the car.
- Thread the 8122 Ball Stud into the front face of 3304
Steering Slide and top face of the 3202 Steering Arm.
- Insert the Steering Slide into the 3304 Steering Rack,
mount the rack to the chassis using 5262 Screws.
- Mount the linkages from Step #1 by snapping the Ball Cups
onto the Ball Studs.
- Secure the Ball Ends on the Camber Links to the back of the
Susp Mounts by using 5257 Screw through the upper hole
on the front of the Shock Tower like in Bag A/Step#2. The
length of the thread will come thru the Susp Mount, slide
the Ball End on the thread and secure with 5217 Nut.
- Attach the steering links by snapping the ball cups on the
ball ends.
1:1
5255 Qty 4
4-40 x 5/8 BH Screw
INNER
OUTER