CustomWorks Dominator, Model

Page: 9 / 16

Bag J Bag J
Bag J Bag J
Bag J
cont... cont...
cont... cont... cont...
STEP #2
- Fasten the 3642 Radio Tray to the Main Chassis using
(3) 5263 Screws & (3) 5217 LockNuts.
- Attach 5240 Servo Mounts to your servo in the
position shown using 5253 Screws and 5212 Washers.
- Fasten the servo to the Radio Tray using (2) 5252
Screws.
- Thread 8122 Ball Stud into the lower-most center
hole in the 5242 Servo Saver.
- Determine which of the Spline Inserts are correct for
your servo by pressing it over the drive on the servo.
Align the servo so it has equal throw in both direc-
tions.
- Press the Servo Saver onto the Spline Insert so that
the Servo Saver is perpendicular to the servo, attach
using the screw that came with your servo.
- Snap the main steering link from “Bag G” on the
remaining 8122 Ball Studs.
- Attach the 3209 Antenna Mount using a 5263 Screw.
5263
5263
5263
5252
(TO SERVO MOUNTS)
5252
(TO 3209)
3209
5240
5240
5242
5217
Mount Bag Mount Bag Mount Bag Mount Bag Mount Bag
-Parts for
Mount
Bag
5283 Qty 7
8-32 x 1/2 FH Screw
1:1
3229 Qty4
Post Collar 5207 Qty 3
8-32 Lock Nut
5217 Qty 4
4-40 Lock Nut
1275 Qty1
INT Front Clip
3229 Qty4
Short Body Post
3015 Qty1
INT Front Bumper
1274 Qty 1
Rear Body Mount
3229 Qty 4
Set Screw
- Slide the Post Collar onto the 3229 Short Body Post, use the Set
Screw to retain the Collar.
- Mount the (2) 3229 Short Body Posts to the rearward set of holes
on the 3015 Bumper using 5283 Screw.
- Attach and center the 3015 Bumper to the 1275 Front Clip using
5283 Screws and 5207 Nuts. The bumper is slotted to allow you to
adjust the body position easily.
- Mount the 1275 Front Clip to the Chassis using (1) 5283 Screw
and 5207 Nut along with (2) 5254 Screws and 5217 Nuts.
FRONT
-Attach the (2) 3657 Rear Bumper Mounts to the Drive Carriers using (4)
5253 Screws and (4) 5263 thru the chassis.
- Mount the 3658 Rear Bumper to the Mounts using (4) 5254 Screws.
- Fasten the 1274 Rear Body Mount to the top of the Bumper Mounts
using (2) 5254 Screws and (2) 5217 Nuts for added strength.
- Attach the (2) 3229 Short Body Posts to the 1274 Rear Body Mount using
5283 Screws.
- Side the Body Post Collars onto the Body Posts and use the 3229 Set
Screw to adjust the height of the collar for the body of your choice.
REAR
5253 Qty 6
4-40 x 3/8 BH Screw
1:1
3229
COLLAR
SET SCREW
3229
POST
5207
1275
5207
5283
5263
5283
5283
5253
3229
POST
3229
COLLAR
3015
3657 Qty 2
Rear Bumper Mount 3658 Qty 1
Dominator Rear Bumper
1:1
5263 Qty 6
4-40 x 3/8 FH Screw 5254 Qty 6
4-40 x 1/2 BH Screw
1:1
5254
5283
5263
5254
X4
3658
1274
3657