Pairing Cable Installation Guide
to Synchronize Two Beds
7
Step 1-1
Put the bottom of the bed frame
upward, Locate the black control box next to
the actuator.
Step 1-2
Take out the wire cap and remove the
plug of the handset from the control box. (Same
steps for the second bed frame)
Step 2-2
Insert the 90
0
plug head into the
handset terminal on the control box of the
bed frame and put back the wire cap. (Same
steps for the second bed frame.)
Step 3
Connect handset remote with the
pairing Cable and finish the paring.
* (Please carefully match the pins on the plug
while inserting.)
Step 2-1
Take out the Pairing Cable. The 90
0
plug
head with the longer part of cable is for connecting the
black control box. Straight plug head with shorter part
of cable is for connecting the handset remote.
Adjustable Bed Frame
The
“ELEVATION”
This model does not include a Pairing Cable. Pairing Cable can be
purchased separately by contacting your authorized retailer
