Custom Equipment HY-BRID LIFTS PRO PS-1030, Maintenance & Troubleshooting Manual

Page: 14 / 48

PRO SERIES PS-1030 • PS-1430 • PS-1930 14
SECTION 3
MAINTENANCE CHECKLISTS
Model:
Serial No.
• Check each item listed below.
• Use proper operating, service, and
maintenance manual for specific information
and settings
• If an item is found to be unacceptable make
the necessary repairs and check the “repaired”
box.
• When all items are “acceptable”, the unit is
ready for service.
• If an item is found to be unacceptable, make
the necessary repairs and check the “repaired”
box. When all items are “acceptable,” the unit
is ready for service.
3.2 | PRE-DELIVERY/ANNUAL/FREQUENT INSPECTION CHECKLIST
WORK PLATFORMS SHALL BE INSPECTED,
SERVICED, AND ADJUSTED TO MANUFACTURER’S
REQUIREMENTS BY A QUALIFIED MECHANIC PRIOR
TO EACH SALE, LEASE, OR RENTAL, AND EVERY 3
MONTHS OR 150 HOURS, WHICHEVER COMES FIRST,
AND ANNUALLY.
Y -Yes/Acceptable N -No/Unacceptable R -Repaired N/A -Not Equipped Y N R N/A
BASE:
Inspect slide tracks for damage
All frame bolts tight
Pump secure
DC drive motors secure
Batteries fully charged
Tie rods secure
WHEELS:
Snap rings secure
Bolts/nuts tight
SCISSORS:
No broken welds
No bent beam members
All rollers turn freely
Retaining rings secure on pivots
Maintenance locks: Stored and securely connected
Scissor beam tube bolts tight
PLATFORM:
No bent rails
No broken welds
All rails in place/secure
110V outlet safe/working
Entrance gate closes freely