Custom Engineering s'print, User Manual

Page: 58 / 60

APPENDIX A - ACCESSORIES AND SPARE PARTS
1 A-
DPT100-B/I/BT
1,5
1,5
5
7
54
4
7
25,4 *
0,5
0,5
5
Printout result with alignment
at first printed line
pressing the multifunction key
Printout result with alignment
at first printed line
Pinting Test
First
Second
Third
Pinting Test
First
Second
Third
Pinting Test
First
Second
Third
A.1 TICKET ALIGNMENT
A.1.1 Ticket alignment
Paper stock with alignment marks is permitted so that tickets of a fixed length or with pre-printed areas may be
utilized.To guarantee proper alignment, the “Alignment” parameter must be enabled under setup using the key
(see: setting configuration parameters)
The notch mark must be placed on the termic side of the ticket itself (printable area); the label dimension is:
* The value showed with on asterisk in the fig.A1 indicates the minum
dimension controlled
Applicable only for the label printer version (s’ print-LP1 model) :
Using a paper roll with the characteristics as shown in fig. A.1, pressing the multifunction key to align
automatically the ticket at first printed line (see fig. A.2).
Otherwise using a different model of paper roll this additional functionality of the key is not available; to align the
ticket it’s necessary using a $1D $F6 command.
(Fig.A.1)
(Fig.A.2)