Custom Engineering s'print, User Manual

Page: 46 / 60

3. PRINTER FUNCTIONS
3-12 DPT100-B/I/BT
1 7 $ B 1 $
[Name] Disables underlined printing
[Format] ASCII ESC q
Hex 1B 71
Decimal 27 113
[Description] Annuls underlined printing
[Notes]
[Default]
[Reference]
$1B $51
[Example]
3 7 $ B 1 $
[Name] Transmits the next character in serial
[Format] ASCII ESC s
Hex 1B 73
Decimal 27 115
[Description] Transmits the next character it receives on the serial port
[Notes]
[Default]
[Reference]
[Example]
If you transmit: $1B $73 $41
the last character, $41, will not be printed but immediately transmitted on the serial line
2 n 1 n A F $ B 1 $
[Name] Print graphic bank ( 384
× ×
× ×
×
85 dots).
[Format] ASCII ESC { } n1 n2
Hex 1B FA n1 n2
Decimal 27 250 n1 n2
[Range] 0
≤
n1 , n2
≤
255
[Description] Prints the graphics bank from flash.
n1 specifies the starting dot line ( 1
÷
85 ).
n2 specifies the number of lines to print.
[Notes] • If n1 + n2 > 85 the printer only prints 85 - n1 + 1 dotlines.
[Default]
[Reference]
[Example]
To print the graphic bank from dotline 10 to dotline 40, send:
$1B $FA $0A $1E
6 7 $ B 1 $
[Name] Transmit paper sensor status
[Format] ASCII ESC v
Hex 1B 76
Decimal 27 118
[Description] When this command is received, transmit the current status of the paper sensor.
[Notes] • This command is executed immediately, even when the data buffer is full (Busy ).
The status to be transmitted is shown in the table below: