Custom Engineering B202H, User Manual

Page: 72 / 112

6.3 Cleaning
For periodic cleaning of the printer, see the instructions below.
PRINTING HEAD
2
Open the printer cover
to the vertical up position.
3
Clean the printing head by using
a non-abrasive cloth moistened with isopropyl.
ATTENTION:
Do not touch the head heating line with bare hands or
metal objects.
Do not perform any operation inside the printer immedi-
ately after printing because the head and motor tend to
become very hot.
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
1
Disconnect the power supply cable.
STATUS
NEAR P
APER
END
FF
LF
ISOPROPYL ALCOHOL
6. MAINTENANCE
72 KPM150H-AERO
User manual