CONTROLS & FEATURES
CAR CONTROLS: located in the
elevator cab (reference figure A)
1. Digital car position indicator with car
direction arrows:
Displays the floor number
at which the car is located and displays an
arrow indicating the direction that the car is
traveling.
2. Cab light switch:
Turns the cab ceiling
lighting on and off. If left in the on position,
the cab lights will time out automatically after
3 minutes and illuminate when the elevator is
called or if a car or landing door is opened.
3. Car push buttons:
Used to send the
elevator to a desired landing. The button will
illuminate indicating that the car call has been
registered and will extinguish upon arrival at
the selected landing. Also used to unlock the
hoistway doors when the elevator is
equipped with electric solenoid door locking
devices. See “operation instructions”
4. Emergency stop switch:
The elevator will
stop movement when pulled. Remember to
always push the button in during normal
operation, otherwise the elevator will not run.
5.
Alarm push button:
This button should be
pushed and held to activate the alarm siren in
the event of an emergency. It is used to alert
others in the residence
.
LANDING CONTROLS: located near
each landing door (reference figure B)
1. Car here indicator light:
This indicator will
illuminate when the elevator arrives at the
landing. A programmable time out feature
can be activated by your authorized Custom
Elevator representative to time out the
indicator lights after (10) seconds.
2. Call push button:
These buttons are used
to call the elevator to the landing. The button
will illuminate indicating that the call has been
registered and will extinguish when the
elevator arrives at the landing. Also used to
unlock the hoistway doors when the elevator
is equipped with electric solenoid door
locking devices. See “operation instructions”
FI GU RE A
2
FI GU RE B
