Road Glide® Installation:
1.
Remove the 4 windshield fasteners,
Picture 10.
Lift the
windshield up to remove. Store the windshield in a safe
place to prevent damage.
2.
Once the windshield fasteners and windshield are re-
moved, you will need to remove the vent. The vent is
secured to the fairing by clips. Position yourself in the
front of the motorcycle and lift straight up on the vent to
release. Refer to
Photo 11.
3.
Locate both the left and right 3 pin turn signal connect-
ors. Press down on the releasing tab of the JAE connect-
or to disconnect. Refer to
Photo 12
.
10
11
Questions? Call us at: 1 (800) 382
-
1388 M
-
TH 8:30AM
-
5:30PM / FR 9:30AM
-
5:30PM EST
04
-
2020
Installation Instructions
-
Page 4.
12
4.
Remove the
3/16”
socket Allen head bolts from
the outside of each turn signal housing. Refer to
Photo 13.
5.
Remove both left and right speaker grilles on the
inner fairing.
6.
Once the speaker grilles are removed, Locate
and remove the T
-
27 torx bolts in each corner of
the speaker housing. Refer to
Photo 14.
13
14
