Questions? Call us at: 1 (800) 382
-
1388 M
-
TH 8:30AM
-
5:30PM / FR 9:30AM
-
5:30PM EST
01/2020
Installation Instructions
-
Page 3.
2 Pin Connector
Fairing Vent
6
Plug Tab:
Push In
2 Pin Connector Plug
7
7
Installation:
19.
Route the wiring harness from each LED Fork Reflectors to the
associated side BCM Adapter Harnesses in the fairing and con-
nect to the Female JAE Connector.
20.
Using the provided wire ties, secure the LED Fork Reflectors wir-
ing harnesses to prevent the wires from being damaged.
21.
Reinstall the fairing and windshield in the reverse order that it
was removed.
NOTE: THE 4 INNER FAIRING BOLTS ARE
TWO DIFFERENT LENGTHS!
The 2 longer bolts go in the top
holes and the 2 shorter bolts go in the bottom holes of the inner
fairing.
22.
Reconnect the negative battery cable to the battery and reinstall
the seat.
23.
Perform a BCM sync by turning the ignition on, turn the 4 way
hazards on, turn the ignition off. Allow the 4 way hazards to run
for 3
-
4 minutes. Turn the ignition on. Turn the 4 way hazards off.
Turn the ignition off.
24.
Test operation of all lighting in all modes before riding.
