background image

1.  ON (Push) / VOLUME / FUNCTION
ADJUST
2.  SOURCE SELECT RADIO/USB/iPOD/AUX
3.  PRE-SET 1 / PAUSE
4.  PRE-SET 2 / PREVIEW SCAN 
5.  PRE-SET 3 / RANDOM PLAY
6.  PRE-SET 4 / DISC UP OR FOLDER UP

7.   PRE-SET 5 / DISC DOWN OR FOLDER DOWN
8.   TUNE UP/DOWN/ PREVIOUS OR NEXT TRACK
9.   AM/FM BAND / FOLDER / PLAYLIST / ARTIST
10.  SLIDEBAR LEFT ANALOG / RIGHT DIGITAL
11.  LCD 

CONTROLS

Bluetooth

®

Option:

By adding the Custom Autosound BLUKIT you can stream music or do hands
free calling from your Bluetooth enable device to this radio. 

COMPACT DISC OPTION:
By adding Custom Autosounds CD1 single disc player or USA-CD60 6 disc
CD changer, you can enjoy many hours of music and operate all controls of
the CD changer from the buttons on the radio.  Normally the CD changer is
mounted out of sight in the trunk.  

6

13

1

2

10

11

9

8

3

4

5

6

7

wise to select manual or auto.

AREA (USA/EUR)

The radio has the capability to receive
AM/FM broadcast frequencies in other
countries. To modify the default setting.
(default), turn the left front knob.

BEEP 

This function controls the audible beep
confirmation that sounds during radio
operation. With the beep function dis-
played, turn the left front-knob to select
BEEP OFF, BEEP 2ND or BEEP ALL.
If you selected the BEEP 2ND, press
and hold the knob for 1 seconds will hear the audible beep confirmation only.

CT ON/OFF

If supported by the station, adjust to
turn the CT (Clock Time) function
on/off. This feature can synchronize the
clock with the radio station’s clock.

VOLUME  ADJUST/LAST

Factory default for this menu option is
VOL LAST,which maintains the last vol-
ume the radio was at when you turned
it off. When you select ADJ, you can
set the default turn-on volume at any
level(ADJ VAL 00-45), regardless of
what the volume level was when you
last turned off  the unit.

PROGRAM TYPE (PTY) (Works in EURO Mode only)
This function will allows you to Searching a special PTY Station in FM Mode. Turn the
left front knob clockwise or counter-clockwise to select the PTY which you want, And
then, Turn the right front knob clockwise to activate the Search process.

TA SEEK (Works in EURO Mode only)

This function allows you to select the tuner working in TA Seek or TA Alarm mode. Turn
the left front knob clockwise or counter-clockwise to select TA Seek or TA Alarm.

PI Sound  (Works in EURO Mode only)

This function allows you to select the tuner working in PI Sound or PI Mute mode. Turn
the left front knob clockwise or counter-clockwise to select PI Sound or PI Mute.

MASK DPI (Works in EURO Mode only)

This function allows you to select the tuner working in Mask DPI or Mask All mode. Turn
the left front knob clockwise or counter-clockwise to select Mask DPI or Mask All.

RDS tuners can automatically tune in stations according to the style of music (or talk)
they broadcast. Some RDS tuners can even break in with traffic alerts or emergency
broadcasts.

RDS enables your receiver to display text messages (usually call letters and format info)
that many FM stations include on a subcarrier signal within their normal broadcast sig-
nal.

The RDS function is always active, and if the FM station you are listening to is broad-
casting RDS information, the radio station call letters, song info, artist info and other
messages will appear. 

PRESS

TURN

PRESS

TURN

PRESS

TURN

PRESS

TURN

Figure 3

Slidebar Manual_new_USA-5_manual_peter  1/23/2014  9:19 AM  Page 7

Summary of Contents for SLIDEBAR RADIO











Reviews: