Custom Audio Electronics TK180, Short Manual

Page: 21 / 36

DISPLAY MESSAGES
The display shows the emulation currently set, the irmware release and a device status message on the upper row.
The lower row reports an error code (for example, ERR8) and the error description, in case of not successful outcome of commands (see following image).
The possible status messages are the following:
-
ONLINE The device is ready (standby message)
-
OFFLINE The device is in a “busy” condition (during commands sending, on paper jam, and so on)
- LINK DOWN The serial connection cable is unplugged
- COVEROPEN The upper cover is open
- NOPAPER No paper loaded into the device
- PAPERJAM The paper is jammed inside the device
SER X.XX ONLINE
ERRx <description>
Firmware
release
Device status
message
Emulation
set
Commands outcome
with description
21