6.3 Cleaning
For periodic cleaning of the device, see the instructions below
Roll
Paper path
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the device.
ON
Alcohol, solvent
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the device.
ON
ISOPROPYL ALCOHOL
1
Disconnect the power supply cable and open
the inspection door (see previous paragraphs).
2
1
Disconnect the power supply cable and open
the inspection door (see previous paragraphs).
2
Remove any scraps of paper and the
accumulated paper dust in the inspection
compartment and in the paper input area
Clean the printing roller by using
a non-abrasive cloth moistened with isopropyl.
44