Custom Audio Electronics KPM862, User Manual

Page: 91 / 152

6.7 Operation parameters
The device allows the coniguration of the parameters listed in the following table.
The parameters marked with the symbol D are the default values.
Settings remain active even after the device has been turned off and they are stored in non-volatile memory.
PRINTER EMULATION
Available emulations for the device:
CUSTOM/POS D
SVELTA
PRINT MODE
Printing mode:
Normal D = enables printing in normal writing way
Reverse = enables printing rotated 180 degrees
AUTOFEED Setting of the Carriage Return character:
CR disabled D = Carriage Return disabled
CR enabled = Carriage Return enabled
CHARS / INCH Font selection:
A = 11 cpi, B = 15 cpi
A = 15 cpi, B = 20 cpi
D
A = 20 cpi, B = 25 cpi
CPI = Characters Per Inch
FONT TYPE Setting of the font type:
International D = enables the use of the 256 characters font tables
Chinese GB18030 = enables the use of the chinese extended font GB18030
Korean CP949 = enables the use of the korean font CP949
SPEED / QUALITY Setting of printing speed and printing quality:
High Quality
Normal
High Speed
D
PRINT WIDTH Width of printing area:
38 mm 46 mm 54 mm 62 mm 70 mm 78 mm
40 mm 48 mm 56 mm 64 mm 72 mm 80 mm D
42 mm 50 mm 58 mm 66 mm 74 mm
44 mm 52 mm 60 mm 68 mm 76 mm
PAPER THRESHOLD Threshold value (in percent) for the recognition of paper presence by the paper presence
sensor:
30% 60% 90%
40%
D 70%
50% 80%
91