Custom Audio Electronics KPM300, Command Reference Manual

Page: 66 / 128

$1D $E0
Printers: KPM300
VeriPrint
, KUBE II
VeriPrint
, KUBE-L
VeriPrint
, TK300II
VeriPrint
[Name]
Enable / disable automatic FULL STATUS back
[Format] ASCII GS { } n
Hex 1D E0 n
Decimal 29 224 n
[Range] 0 ≤ n ≤ 255
[Description] Enable / disable automatic full status back. n speci fi es the composition of FULL STATUS
as follows :
BIT OFF/ON HEX Decimal FUNCTION
0
Off 00 0 Disable paper status
On 01 1 Enable paper status
1
Off 00 0 Disable user status
On 02 2 Enable user status
2
Off 00 0 Disable Recoverable Error Status
On 04 4 Enable Recoverable Error Status
3
Off 00 0 Disable Unrecoverable Error Status
On 08 8 Enable Unrecoverable Error Status
4
Off 00 0 Disable Info1 status
On 10 16 Enable Info1 status
5
Off 00 0 Disable Info2 status
On 20 32 Enable Info2 status
6 - - - RESERVED
7 - - - RESERVED
[Notes] • Once enable at least one byte of the FULL STATUS, for each change of at least one of
the bits which compose the required status, the status sent in automatic from the printer
will be so composed as follows:
1° Byte = 0x10 (DLE)
2° Byte = n
Next byte (depends how many bits are active in in)
[Default]
[Reference] $10
$04
[Example]
$1D $E1
Printers: KPM300
VeriPrint
, KUBE II
VeriPrint
, KUBE-L
VeriPrint
, TK300II
VeriPrint
[Name]
Reading of length paper (cm) available before virtual paper-end
[Format] ASCII GS { }
Hex 1D E1
Decimal 29 225
[Range]
[Description]
Reading of length (cm) paper available before virtual paper-end.
The command return a string pointing out how much paper is available, for example if
there are 5.1 m before the paper end, it will be: ‘510cm’
[Notes] • The lenght of residual paper reported is just as an indication because tolerances and
other factors are not taken into consideration (paper thickness, roll core diameter, roll
core thickness). The virtual paper-end limit is set by the command $1D $E6.
ESC/POS™ Emulation
66
Command Reference