Custom Audio Electronics KPM202, User Manual, Page: 107 / 116

CUSTOM/POS emulation
To deine the alignment point you need to set the printer parameters that compose the numerical value of the “Notch Dis
-
tance” parameter (see par.6.4).
For example, to set a notch distance of 15 mm between the notch and the alignment point, the parameters must be set
on the following values:
Notch Distance Sign : +
Notch Distance [mm x 10] : 1
Notch Distance [mm x 1] : 5
Notch Distance [mm x .1] : 0
The “Notch Distance” parameter, may be modiied as follows:
• during the setup procedure of the device (see chapter 6)
•
by modifying the Setup.ini ile (see par.13.5)
• by using the command 0x1D 0xE7 (for more details, refer to the commands manual)
• by driver.
SVELTA emulation
The ticket features and the alignment parameters, may be modiied as follows:
• by using the parameters of the <LHT> command (for more details, refer to the commands manual)
•
by modifying the Setup.ini ile (see par.13.5)
• by driver
The following igure shows the some of parameters for alignment of the Setup.ini ile:
• “Ticket X Dimension”
• “Ticket Y Dimension”
• “Notch Width”
• “Notch Distance”
PRINTING DIRECTION
“Notch Distance”
“Notch Width”
“Ticket X Dimension”
“T
icke
t
Y
D
ime
n
si
o
n
”
Alignment
point
107