Custom Audio Electronics K-80, User Manual

Page: 71 / 76

Model B
A C B
A = distance between printhead and alignment sensor = 32.5 mm
B = distance between printhead and cutter = 10.5 mm
C= distance between cutter and paper outlet = 33.5 mm
To deine the alignment point you need to set the device parameters that compose the numerical value of the “Black Mark
Distance” parameter (see par.5.4).
For example, to set a black mark distance of 15mm between the black mark and the alignment point, the parameters must
be set on the following values:
Black Mark Distance Sign
: +
Black Mark Distance [mm x 10]
: 1
Black Mark Distance [mm x 1]
: 5
Black Mark Distance [mm x .1]
: 0
The “Black Mark Distance” parameter, may be modiied as follows:
•
during the Setup procedure of the device (see chapter 5)
•
using the tool "CE PRINTER SET"
•
in CUSTOM/POS emulation, by using the 0x1D 0xE7 command (for more details, refer to the Commands Manual)
•
by driver
71