B
MAINTENANCE
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
31
Owner’s Guide
LIGHT BULB REPLACEMENT
To decrease the risk of premature bulb failure, do not allow your fingers to contact new bulbs. Use clean, dry
paper or paper towels to touch the glass part of the bulb.
Headlight
To prevent the bulb from accidentally disconnecting and possibly melting or igniting plastic components, the
locking ring MUST be installed again after installation of replacement bulb.
Rotate the bulb socket a quarter turn to the left to unlock.
Remove the bulb and socket. Install new bulb and rotate
the socket a quarter turn to the right to secure.
Replacement bulbs are available from a local Distribu-
tor, an authorized Branch or the Service Parts Depart-
ment.
Taillight
Remove two Phillips head screws that secure the lens.
Pull the lens from the housing to access the taillight bulb.
Remove the light bulb and install a new bulb. Make sure the bulb con-
tacts the socket correctly.
Replace the lens and install the Phillips head screws.
Replacement bulbs are available from a local Distributor, an authorized
Branch or the Service Parts Department.
FUSE REPLACEMENT
The fuse block is found below the driver seat. Lift the seat bottom to access the fuses.
Remove the old fuse and replace with a new fuse of the same type and size.
Fuses are available from a local Distributor, an authorized Branch or the Service Parts Department.
Inside of Cowl
Headlight Bulb
Headlight Housing
Screw
Rear Fender
Taillight Lens
Taillight Bulb
