MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
5 - 8
5
FUSES AND CIRCUIT BREAKER
Thermal Circuit Breaker
The thermal circuit breaker prevents overloading of the drive motor. The breaker automatically resets after approxi-
mately 20 seconds, an audible click will sound when the breaker resets. Should the vehicle be stopped by the open-
ing of the circuit breaker, turn the vehicle off to avoid an accidental start when the breaker resets.
If the circuit breaker should open while driving on an incline, immediately apply the service and
parking brake to prevent loss of vehicle control.
Fuses
4A
4A
5A
5A
630928
Fuses on this vehicle are located behind the door on the control panel. To access the
fuses, remove the phillips head screw that secures the door to the control panel and pivot
the door away from the control panel. Replace blown fuse with specified size only.
TRANSPORTING VEHICLE
Towing
This vehicle is NOT designed to be towed.
It is recommended that the vehicle be moved by placing the entire vehicle on a trailer, flat bed truck or other suitable
transport.
Hauling
To reduce the possibility of severe injury or death while transporting the vehicle:
Secure the vehicle and contents.
Never ride on the vehicle being transported.
Always check that the vehicle and contents are adequately secured before transporting. The rated capacity of the
trailer or truck must exceed the weight of the vehicle (see GENERAL SPECIFICATIONS for vehicle weight) and load
plus 400 lbs. (181 kg). Set the park brake and secure the vehicle using ratchet tie downs.
FUSE #
SIZE
FOR
LOCATION
PART
NUMBER
1
4AMP
58V
Key Switch
Fuse block in the control panel.
629104
2
4AMP
58V
State of Charge Meter
Fuse block in the control panel.
629104
3
5AMP
58V
Brake, Turn and Tail Light
Fuse block in the control panel.
628081
4
5AMP
58V
Reverse Warning Indicator
Fuse block in the control panel.
628081
