Cushman 646442, Owner'S Manual

Page: 160 / 184

7
-0
hauler 4x4 Diesel
MAIN fUsE (sloW-BloW fUsE) (AG)
(1) slow-blow fuse
if the start motor and all electrical de-
vices do not operate at all when turn-
ing the key the switch to the "start"
position, the first thing to inspect is
the main fuse.
1. remove the engine inspection
shield.
2. check if the yellow slow blow fuse
installed to the positive start motor
cable is blown.
3. remove the tape and replace the
fuse with a new one if necessary.
4. Wrap the fuse with insulation tape
after replacement. Make sure that
the inspection shield is visible.
5. if this fuse is repeatedly blown,
contact your Dealer.
AlIGNING WhEEl AND
ChECkING WhEEl NUT (Ah)
(1) Wheel nut
2. unscrew the nuts on the wheel to
be replaced for only 1 turn.
3. lift the vehicle with a hydraulic
jack and then support the vehicle
with the safety stand. then, lower
the hydraulic jack so that the vehi-
cle chassis sits on the stand.
4. unscrew the wheel nuts complete-
ly to remove the wheel.
1. park the vehicle on level ground
and apply the parking brake firmly.
UUVo758A
UUVo746A
UTV-EZGO-Hauler 4X4 Diesel-07.in40 40 2015-05-26 오전 9:43:25