Cushman 646442 Owner'S Manual Download Page 135

Page: 135 / 184

-1

MaiNteNaNce

it is not easy to inspect the cvt on

your own. it is recommended to have

it inspected by your Dealer.
1. park the vehicle on level ground

and apply the parking brake firmly.

ChECkING CVT BElT (J)

2. stop the engine, remove the seat

cushion and remove the side cov-

er on the left of the vehicle.

(1) side cover

UUVo715A

3. remove the battery.

(1) battery



You can get burnt by touching

hot parts, such as the muffler.

Wait until hot parts are cooled

down after stopping the en-

gine.

WARNING

UUVo716A

4. remove the heat shield covers (1

and 2).

(1) heat shield cover 1

(2) heat shield cover 2

UUVo717A

UTV-EZGO-Hauler 4X4 Diesel-07.in15 15

2015-05-26 오전 9:43:17

Summary of Contents for 646442

























































































































































































Search results

Summary of Contents for 646442

Reviews:

Related manuals for 646442

Brands by name

Popular brands

Cushman 646442, Owner'S Manual

Search results

Summary of Contents for 646442

Reviews:

Related manuals for 646442

Brands by name

Popular brands