5 - 7
MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
5
LIGHT BULB REPLACEMENT
To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean, dry tissue or
paper towel to handle the glass portion of the bulb.
Headlight and Front Turn Signal
For vehicles equipped with lights mounted in the cowl,
locate bulb socket on backside of light and turn bulb socket
a quarter turn counterclockwise to unlock and pull out bulb
and socket. Insert new bulb and rotate socket a quarter
turn clockwise to secure.
Similarly replace the turn signal light bulb, locate bulb
socket on backside of light bar and turn bulb socket a quar-
ter turn counterclockwise to unlock and pull out bulb and
socket. Insert new bulb and rotate socket a quarter turn
clockwise to secure.
Brake Light
To replace the brake light bulb, remove two phillips head
screws securing lens, pull the lens out of the housing.
Remove the light bulb and install a new bulb, make sure
the bulb makes good contact with the socket. Replace the
lens and reinstall the phillips head screws.
FUSE REPLACEMENT
To replace fuses, raise the seat bottom of the last forward
facing seat, the fuse block is located on the fender liner on
the driver side of the vehicle. Pull out old fuse and replace
with a new fuse of the same type and size.
Inside
of Cowl
Headlight
Bulb
Rear Fender
Lens
Bulb
Fuse Block
