INTRODUCTION
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
3 - 6
3
Before attempting to tow vehicle, move the Run-Tow/Maintenance switch to the ‘Tow/Maintenance’ position. Failure
to do so will damage the controller or motor.
Before disconnecting or connecting a battery, or any other wiring, move the Run-Tow/Maintenance switch to the
‘Tow/Maintenance’ position.
After connecting a battery, or any other wiring, wait a minimum of 30 seconds before moving the Run-Tow/Mainte-
nance switch to the ‘Run’ position.
The Run/Tow switch should always be returned to the ’TOW’ position after moving a stalled vehicle. If the switch is left in the
’RUN’ position for an extended period of time, it will drain the batteries.
The Run/Tow switch is located under the seat on the passenger side of the vehicle.
With the switch in ‘TOW/MAINTENANCE’ position:
•
the controller is deactivated
17
16
18
15
14
19
13
NOTICE
Summary of Contents for 2012 HAULER 1000
Page 1: ...622023 Owner s Guide ISSUED JULY 2011 REVISED JANUARY 2012...
Page 75: ......
