of 10
Assembling the Roof
4
4
W
L
D
Top View
Make sure the frame is well levelled and that corners are set at right angles
as shown in the left hand diagram. Forcing the diagonal
in both direction
[D]
to be equal will ensure corners are set at right angles. Consult the table
below for external frame dimensions.
Set frame at
right angles
before continuing
assembly.
5
C-C
View C-C
View C-C
Raise
Spokes
Assembled Roof Framework
Center Spoke
PL104
PL104
S3
S2
062
View D-D
Secure the punched end
of each spokes over the
joint box protrusions.
Insert the corner spokes
by simply wedging one end into the one-
[S2]
inch slot of each corner. Then raise the spoke assembly to fit inside the
plastic joint box
as shown in View C-C. Install as well the
[KC10.PL104]
center support
at this time with the punched holes facing downwards.
[S3]
Fit the punched end of the spokes securely over the joint box protrusions
before installing the joint box cap using screws
. (Repeat step
[KC10.062]
on other side of the structure).
Center Spoke
S3
RECTANGULAR MODEL (see 6 for square model)
External
Dimension
10x10 Model
inches (cm)
10x12 Model
inches (cm)
10x14 Model
inches (cm)
W
116 5/8 (296.0) 116 5/8 (296.0) 116 5/8 (296.0)
L
116 5/8 (296.0) 143 3/4 (365.0) 166 3/8 (422.5)
D
164 7/8 (419.0) 185 1/8 (470.0) 203 1/8 (516.0)
Model # Pavillion 1.0
Distributor: ShadeScapes Americas
970.527.7070
cuscini.shadescapesamericas.com