www.cusamintercom.com
20
Ⅸ、
Entrance guard setup instructions
Refer to the below circle(the
black short circuit block)
1 Set two Management Card
(adding card and deleting card):
First. Switch off the power
→
put the black short-circuit block
cover on 0
→
turn on the power
→
a “bibi” sound
→
Red ,green light flash alternately.
Second, Take a blank card on the above of black short circuit block for 1
second
→
a “bibi” sound
→
successful, remark this is an adding card.
Take another blank card on the above of black short circuit block for 1
second
→
a “bibi” sound
→
successful, named it is a deleting card.
Third. Put the short circuit block cover on 1. Switch on the power.
2, adding user cards: put an adding card on the above of black short-circuit
block for 1 second
→
a “bibi” sound
→
red and green light flash
alternately
→
put a user card on the above of black short-circuit block for
1 second
→
put an adding card on the above of black short-circuit block
for 1 second
→
a “bibi” sound
→
setting successfully. (One user card
can be set only once during above operation)
