34
© 2016 Maka Technologies Group. All Rights Reserved.
15. Troubleshooting
Question
Reason
Solution
The captured image is not
stored
MicroSD card might be full.
Image is not saved before the
power outage.
Make sure to stop recording
before shutting down.
All buttons are invalid
Procedural error or faulty
Operation
Check if Sd Card faulty
Press RESET button to restart
the DVR.
Check SD Card if Formatting
works normally
Device cannot be turn on
or charge
Device might be loaded with
battery or charging connector
might be faulty
Device might have low battery
with loaded battery
Make sure battery is loaded
and if after charging, immediate
shut down happen, battery or
connector might be faulty.
Charge the Battery.
Screen Auto power-off
Screen Saver function is
enabled.
Low Battery.
Press on any button disable the
screen saver mode.
Charge the battery
Unable to record videos
Memory card might be full.
If loop recording has been
enabled, memory card might be
corrupted.
1 Check your memory
card’s
space. Delete files if required.
2 Reformat your Memory
card, if issue still persists,
replace a new memory Card