manualshive.com logo in svg

Curtiss-Wright GTS/DEC/003, Manual

Share
Download
Curtiss-Wright GTS/DEC/003 Manual Download Page 10

GTS/DEC/003

10

4 Apr. 2019 | DST/W/132

CURTISSWRIGHTDS.COM 

© 2019 Curtiss-Wright. All rights reserved. Specifications are subject to change without notice. 
All trademarks are the property of their respective owners.

Ordering information

By default, the standard cable, GTS/CON/002, is included with each card in the shipment. Its part number will be added to the
Confirmation of Order unless an alternative option is specified (see the 

Ground station cables

 data sheet). The GTS SDK 3, software

development kit for GTS-500 boards (SWP/SDK/003) is also included in the order. Additional items must be ordered separately;
refer to Related products for options.

Revision history

Supporting software

Related products 

Related documentation

PART NUMBER

DESCRIPTION

GTS/DEC/003/C

Bit synchronizer and PCM decommutator PCI board (20Mbps) - 1ch

REVISION

DIFFERENCES

STATUS

GTS/DEC/003/C

First release

Recommended for new programs

SOFTWARE

DETAILS

GTS SDK 3

Software development kit for GTS boards (XidML® 3.0)

MODULE

DETAILS

GS Works 9

Real-time and post-test data visualization and analysis software
(Note, GTS/BSC/00x boards are not supported by GS Works 9 in standalone mode; they are only 
supported in conjunction with a PCM decoder such as a GTS/DEC/00x board.)

DOCUMENT

DETAILS

TEC/NOT/024

Evolution of Pulse Code Modulation

DOC/USG/016

Ground Station Boards User Guide

Summary of Contents for GTS/DEC/003











Reviews:

No comments

Brands by name

Popular brands

Load more brands