User Manual
– DuraNET 3300
Quick-Start Guide
MNL-0676-01 Rev A4
ECO- N/A
Effective: 26 Feb 21
Page 33 of 84
Windows:
•
Open the terminal emulator
PuTTY
•
Enter correct COM port and Baud rate
•
To confirm correct configuration and communication link
o
Hit<return> and confirm the CLI prompt
▪
switch>
Figure 2.15: DuraNET 3300 switch> prompt
Recommended Settings
Each time the DuraNET 3300 is zeroized, the settings listed below are cleared. It is recommended to
reenable these settings with the following commands:
enable
config t
license smart reservation
license smart transport off
service declassify erase-nvram
end
copy run start
license smart reservation:
Specific License Reservation allows customers in highly secure networks to
utilize smart licenses without communicating the license information.
license smart transport off:
This command is useful for systems that never see internet, so the switch
doesn’t call home to verify and/or update license. Ideal for offline topology.
service declassify erase-nvram:
This command enables nvram zeroization.
