background image

DuraCOR 310 

 

Glossary    

 

 

 

MNL-0666-01  Rev A3   

ECO-5479 

Effective:  26 Apr 18   

Page 51 of 51 

 

Glossary 

Term 

Definition/Description 

DTK 

A Development Test Kit consisting of Mounting plate-heat sink, CPU/RAM, Carrier, and 
an IO board with commercial connectors 

Base Unit I/O Board 

The board that, through four circular connectors, brings all the Inputs and Outputs to 
and from the DuraCOR 310 Base Unit. This boards also provides access to unused 
Expansion Pins. 

BSP 

Board Support Package, an implementation of specific software for a given board. 

Built-In Test (BIT) 

Mechanism that permits a machine to test itself 

CAN 

Controller Area Network 

COM 

Computer on Module, Single board computer 

COTS 

Commercial Off the Shelf 

Dmux 

A device that takes a single input signal and distributes signal to one of many data-
output-lines. 

DuraCOR 311 

Intel Atom based mission computer, see Curtiss-Wright website for more information 
https://www.curtisswrightds.com/products/electronic-systems/rugged-mission-
computing/duracor-mission-computers/duracor-311.html 

DuraCOR 310 Base Unit 

The DuraCOR 310 without the addition of any expansion segment (removable 2.5” 
SSD) 

DuraDBH 672 

Rugged Commercial Off The Shelf (COTS) Gigabit Ethernet switch and vetronics 
computer system 

Mini PCIe I/O Cards / mPCIe 

Mini PCI express form factor card [30 mm × 50.95 mm] that can be added to the 
DuraCOR 310 Base Unit to add I/O without increasing the size of the system. The 
base unit supports up to three Mini PCIe I/O cards.  Available I/O on mini PCIe form 
factor include: Gigabit Ethernet, MIL STD 1553, ARINC 429, CAN Bus, Frame 
Grabbers, GPS, Wi-Fi, serial ports, analog/digital data acquisition cards, GPIO, etc. 

Mini PCIe I/O Socket 

J2/J3 Connector on Parvus Carrier board. This socket can be used to hold a Mini PCIe 
I/O Card. 

mSATA SSD  

A small form factor [30 mm × 50.95 mm] solid state drive. Also known as MO300A 
form factor. Compatible with Parvus Carrier J4 Connector. 

mSATA SSD/Mini PCIe Socket 

J4 Connector on Parvus Carrier board. This socket can be used to hold an mSATA 
SSD storage card or a Mini PCIe I/O Card. 

Mux / Muxing 

A device that selects one of several input signals and forwards the input into a single 
line 

OpenCL 

Open Computing Language (OpenCL) is a framework for writing programs that 
execute across heterogeneous platforms consisting of CPUs, GPUs, DSPs, FPGAs 
and other processors or hardware accelerators 

OpenGL 

Open Graphics Library (OpenGL) is a cross-language, cross-platform application 
programming interface (API) for rendering 2D and 3D vector graphics 

OpenVG 

Open VG is an API designed for hardware accelerated 2D vector graphics 

SFF 

Small Form Factor designed to minimize volume 

SMARC 

Smart Mobility ARChitecture.  This is the module that houses the processor and many 
of the auxiliary interfaces. 

SoC 

System on Chip, an IC that integrates all components of a computer or other electronic 
system into a single chip. 

SOM 

System On Module, Single board computer 

 
 
 

Summary of Contents for DuraCOR 310




















































Reviews: