manualshive.com logo in svg

Curtiss-Wright DUCOR-80-40-00, User Manual

Share
Download
Curtiss-Wright DUCOR-80-40-00 User Manual Download Page 56

Chapter 5   Troubleshooting  

 

DuraCOR 80-40 User Manual 

 

 

Page 56 of 59 

MNL-0642-01  Rev A5 

ECO-5370 

19 Jan 18 

 

 

Chapter 5   Troubleshooting 

Product Identification 

The product is labeled with the Curtiss-Wright P/N and serial number.  Please refer to this information 
when communicating with Curtiss-Wright, Salt Lake City. 

Technical Assistance 

If you have a technical question or if you cannot isolate a problem with your product, please call or e-mail 
the Curtiss-Wright Salt Lake City Technical Support team:  

Email 

[email protected]

Phone 

1 (801) 433-6322 

Fax 

1 (801) 483-1523 

 

Returning for Service 

Before returning any Parvus product, please fill out a Return Material Authorization (RMA) request form 
available for download from the following website under the support section: 

http://www.curtisswrightds.com/parvus

 

Email this form to the Technical Support email address (

[email protected]

) to receive 

authorization for shipment. An RMA number will be emailed back to you as soon as possible. 

 

 

Note:  You must have the RMA number in order to return any product for any reason. 

 

 

Warning!  

Any product returned to Parvus improperly packed will immediately void the warranty for that particular 
product. 

 
 

Summary of Contents for DUCOR-80-40-00




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands