INSTALLATION INSTRUCTIONS
II21
8#*/45"--"5*0/*/4536$5*0/4ø
080119B
Thermostat
13 Remove the top cover and rotate the shaft on the
thermostat completely clockwise.
IMPORTANT:
When operating the unit at higher
elevations, reduce the factory set operating
temperature by 2°F/1°C for each 1000 ft./300 m of
elevation above 4000 ft./1200 m. Turn the screw
inside the shaft clockwise to reduce the
temperature. Each 1/4 turn reduces the
temperature about 28°F.
14 Replace the top cover.
15 Reconnect the power cord and turn on the toggle
switch on the back of the unit.
16 Depending on the incoming water temperature and
UIFFMFDUSJDBMTQFDJmDBUJPOTUIFXBUFSUBOLUZQJDBMMZ
requires 20 to 30 minutes to reach the factory set
operating temperature.
17 Dispense 12 oz./350 ml of hot water through the faucet
to help purge air from the tubing inside the unit.
