AV1
S-Video
TV
AV2
SELECTING INPUT SIGNAL
Watching AV program
This TV set provides AV input terminals for your convenient connection to VCR, or other video
equipments. To watch video program from AV inputs, press
TV/AV button repeatedly until you see the appropriate input
indicator on the screen.
Notes:
AV1:
Select AV1 when viewing the signals
from the video equipment connected to the AV1 IN
terminals.
AV2:
Select AV2 when viewing the signals
from the video equipment connected to the AV 2 IN
terminals.
S-Video: Select “S-Video” when viewing the
signals from the video equipment connected to the S-VIDEO IN terminals.
Switching from AV to TV
When the TV set is in AV mode, you can press TV/AV button repeatedly to switch back to TV mode.
TUNING IN
TV/CATV selection
Before your TV can memorize the available channels,
you must specify the type of signal source that is
connected to the unit (i.e., an antenna or cable system):
1.
Press MENU repeatedly to display Search
menu.
2.
Press CH- or CH+ to select Signal Input.
3.
Press V- or V+ to select Air or CATV.
4.
Press DISP button on the remote control to
clear the menu screen.
Notes:
Select Air if using VHF/UHF antenna, select CATV if using Cable TV.
Setting the channels into memory
This TV is equipped with a channel memory feature which allows channels to skip up or down to
the next channel set into memory, skipping over unwanted channels. Before selecting channels,
they must be programmed into the TV’s memory.
1.
Press MENU repeatedly to display Search menu.
2.
Press CH- or CH+ to select Auto Search.
3.
Press V+ to start the search. (The TV will begin memorizing all the channels available in
your area.)
4.
Press DISP button on the remote control to clear the menu screen.
To skip unwanted channel
After presetting the channels, you can skip unwanted channels so that only the channels you want
to watch can be accessed with Channel up/down buttons.
Summary of Contents for TV2010
Page 7: ...REMOTE CONTROL ...
