Daily Cleaning
1 Prepare a mild cleaning solution of dish washing detergent and warm water.
2 Wipe any spills, dust or debris from the exterior surfaces, with a damp cloth.
Apply a stainless steel polish to prevent scratches.
3 Turn off water supply at valve behind unit.
4 Open the dispensing faucet to relieve pressure in the dispensing lines.
5 Remove the top cover and clean with the cleaning solution.
6 Clean the faucet assembly:
• Remove the handle/seat cup assembly from the faucet by holding the
bonnet and unscrewing.
• Clean the bonnet and silicone seat cup assembly.
• Use a spiral brush soaked in cleaning solution to clean inside the faucet
body.
• Run the brush through the adapter on the body of the dispenser.
7 Rinse and dry parts that were removed. Assemble the dry parts onto the unit.
Weekly Cleaning and Sanitizing
Use a concentrated cleaning solution to simplify the cleaning procedure. This procedure requires a one gallon
container of a cleaning solution containing hot water and a granulated concentrated cleaner (a cleaner like Coffee
Dispenser Cleaner Corporation #12580, Urnex or equivalent) and a one gallon container of clean hot water.
1 Turn on water supply to the dispenser.
2 Remove the quick disconnect from the tea
concentrate bag.
3 Pull the cap off of the QCD (see detail drawing) and
place this end of the line into the container containing
the cleaning solution.
4 Place a large empty container under the dispenser
faucet.
5 Open the front faucet and dispense at least half of the
cleaning solution.
6
"MMPXUIFEJTQFOTFSUPTJUPWFSOJHIUCFGPSFnVTIJOH
cleaning solution.
continued...
NOTICE
-
Do not use cleaning liquids, compounds or powders containing chlorine (bleach) or corrosives.
5IFTFQSPEVDUTQSPNPUFDPSSPTJPOBOEXJMMEBNBHFUIFmOJTIFT
USE OF THESE PRODUCTS WILL VOID
THE WARRANTY.
Do not immerse the unit in water or any other liquid.
CLEANING INSTRUCTIONS
CI25
TCC, CLEANING INSTRUCTIONS
052119A
Cap
QCD
To mixing
valve
Mix cleaner in
1 gallon hot
water
Bonnet
Seat cup
