![background image](http://html1.mh-extra.com/html/curtis/tcc1/tcc1_user-manual_2699639011.webp)
Setting the Pressure Regulator
The purpose of the regulator is to provide uniform water pressure, so that the mixing valve can produce a stable
and uniform blend of concentrate and water, and also to protect the hydraulics of the dispensing unit from
excessive line pressure.
1 Tilt the dispenser on its side.
2 Locate the regulator adjustment knob and turn it until the pressure level on the gauge reads 15 psi.
OPERATING INSTRUCTIONS
OI43
TCC, OPERATING INSTRUCTIONS
030218NC
NOTICE
-
Do not exceed 25 psi (static). Equipment failure or leakage will result.
IMPORTANT
-
%POPUVTFUIFQSFTTVSFSFHVMBUPSBMPOFUPBEKVTUUIFUBTUFCSJYMFWFM$POmSNUIBUUIFSFHVMBUPS
is properly set, then adjust the taste/brix level using the
Mixing Valve Adjustment
instructions.