If after pressing the TALK button, you receive three “beeps” and no dial tone, check
the following:
1.
Base Unit is plugged into a power source.
2.
If you had a power failure or had unplugged the Base Unit, replace the Handset on the
Base Unit for 2 to 5 seconds to reset the system.
NOTE:
If none of the telephones in the house are working, disconnect one set at a time to
verify that none of the phones are causing the problem. If you still have a problem after doing
this, and your telephone still does not work, please contact your local phone company.
31
Problem Solving
Summary of Contents for TC984
Page 1: ......
Page 6: ...5 HandsetControls...
Page 8: ...7 Base Unit Controls...
Page 36: ...FCCRequirements...
