![background image](http://html1.mh-extra.com/html/curtis/tc924/tc924_owners-manual_2699577031.webp)
If after pressing the Talk button, you receive three “beeps” and no dial tone, check
the following:
1. BASE UNIT
is plugged into a power source.
2.
If you had a power failure or had unplugged the
BASE UNIT
, replace the
HANDSET
on the
BASE UNIT
for 2 to 5 seconds to reset the system.
NOTE:
If none of the telephones in the house are working, disconnect one set at a time to
verify that none of the phones are causing the problem. If you still have a problem
after doing this, and your telephone still does not work, please contact your local
phone company.
30
Problem Solving