![background image](http://html1.mh-extra.com/html/curtis/tc924/tc924_owners-manual_2699577012.webp)
Placing Calls
1.
Press the
Talk
button, the Call Timer
starts to count.
2.
Wait until you hear a dial tone and then
dial the phone number.
3.
When you have finished your call, press
the
Talk
button again or place the
HANDSET
on the
BASE UNIT
.
OR
1.
Dial the phone number.
2.
Press the
Talk
button. The number
displayed will be dialed.
3.
When you have finished with your call,
press the
Talk
button again or place
the
HANDSET
on the
BASE UNIT
.
Redial Feature
1 .
If you get a busy tone, press the
Talk
button or place the
HANDSET
on the
BASE UNIT
to hang up.
2.
Later, press the
Talk
button again.
3.
Listen for a dial tone.
4.
Press the
Re/Pa/Save
button. This
will automatically redial the last
telephone number you called.
5.
When you have finished with your call,
press the
Talk
button again or place
the
HANDSET
on the
BASE UNIT
.
NOTE:
If you are too far away from the
BASE UNIT
, the
HANDSET
emits “beep” sounds
to warn you that the background noise level is too high for proper communication
between the
HANDSET
and the
BASE UNIT
. When you hear this sound, you
should move closer to the
BASE UNIT
to reduce the noise level. Otherwise, the
call will automatically cut off.
Cordless Telephone Operation
11
AM