12
Anytime in the operation of the oven, when the
oven cavity temperature reaches a phenomenon
of 300°C, the oven automatically enters into self
protection mode with one beeping every 1.5 sec
until the said phenomenon disappears, and
STOP/CANCEL is pressed to make the oven back
to normal.
During grill or combination cooking, when the
temperature of oven cavity is lower then 40°C
after cooking already takes place for 5 minutes,
the oven will automatically enter into protection
mode with the screen displaying error code E 02.
This error may disappear after you press the
CANCEL pad.
Error may also occur to the system sensor, which
will make the oven enter into protection mode with
the screen displaying E 04, and beeps can be
heard. As soon as this malfunction disappears,
press CANCEL, the oven will back to normal.
1.
Turn off the oven and remove the power plug from the wall socket before cleaning.
2.
Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls,
wipe with a damp cloth. Mild detergent may be used if the oven gets very dirty. Avoid the use of
spray and other harsh cleaners as they may stain, streak or dull the door surface.
3.
The outside surfaces should be cleaned with a damp cloth. To prevent damage to the operating
parts inside the oven, water should not be allowed to seep into the ventilation openings.
4.
Wipe the door and window on both sides, the door seals and adjacent parts frequently with a
damp cloth to remove any spills or spatters. Do not use abrasive cleaner.
5.
Do not allow the control panel to become wet. Clean with a soft, damp cloth. When cleaning the
control panel, leave oven door open to prevent oven from accidentally turning on.
6.
If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This
may occur when the microwave oven is operated under high humidity condition. And it is normal.
7.
It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy
water or in a dishwasher.
8.
The roller ring and oven floor should be cleaned regularly to avoid excessive noise. Simply wipe
the bottom surface of the oven with mild detergent. The roller ring may be washed in mild sudsy
water or dishwasher. When removing the roller ring from cavity floor for cleaning, be sure to
replace in the proper position.
9.
Remove odors from your oven by combining a cup of water with the juice and skin of one lemon
in a deep microwaveable bowl, microwave for 5 minutes. Wipe thoroughly and dry with a soft
cloth.
10.
When it becomes necessary to replace the oven light, please consult a dealer to have it replaced.
C
C
L
L
E
E
A
A
N
N
I
I
N
N
G
G
A
A
N
N
D
D
C
C
A
A
R
R
E
E
